[
Dynamic flexural strength
]
Product Name:
Dynamic flexural strength
Product Model:
Manufacturer:
JENTEST
Product file:
No Related Documents
Product Description
Dynamic flexural strength
Dynamic flexural strength
Test standard: DIN72551-5-1991\VW60306
Dynamic flexural strength
Detail
JN-DTWQ-72551 Dynamic flexural strength
Test standard: DIN72551-5-1991\VW60306
This test shall be agreed upon separately for cables with nominal cross sections > 25 mm².
Requirements
While applying the test voltage, no electric breakdown must occur on the specimen, and the conductor of the stripped specimen must show no damage (e.g., strand breakage) on visual inspection.
Test
Age specimens of (200 ± 25) mm length in a natural convection oven acc. to DIN 50011-12 at the service life temperature acc. to Figure 8 for 48 h. Next, clamp the aged specimens in the test device acc. and store at TU for at least 4 h. Perform 300 bending cycles (cycle time approximately 3 s at nearly constant jaw speed) in the cold chamber. Then let the specimen warm up to room temperature. Then perform the test acc. to Section 8.5.3 (1-minute voltage protection), followed by a visual inspection.
Dynamic flexural strength\ Dynamic flexural strength
Dynamic flexural strength\ Dynamic flexural strength
Leave a message for product